Induction cooking plate

House General

Elevator

Electrical Breaker

Hot water and heating

Air Conditioning

Television

Washing Machine

Safe

To Do Before Leaving

Kitchen

Microwave

Induction cooking plate

Electric Oven

Dishwasher

Preparation before using
When the power is switched on, the buzzer will sound once and all the indicators will come on for one second and then go out. The ho bis now in standby mode. Place the pan in the centre of the cooking zone.
Operating instructions
When the ON/OFF key is pressed, all the indicators show “-“. Select the power level by pressing the “+” or “-“ key for the relevant hotplate. To begin with the indicator shows “5”. Adjust up or down by pressing the “+” or “-“ key. If you press the “+” and “-“ keys simultaneously, the power setting returns to “0” and the cooking zone switches off. NB: When the ON/OFF key is pressed, the induction hob returns to standby mode if no other operation is carried out within one minute.
Timing function
Press the timing key and the indicator will start flashing. Then set the time for between 1 and 99 miutes, by pressing the “+” and “-“ keys. Pressing the “+” key once increases the time by one minute; pressing the “-“ key once decreases the time by one minute. When the set time exceeds 99 minutes, i twill automatically return to “0” minutes. If the “-“ and “+” keys are pressed simultaneosly, the indicator will display “0”.
1. Select the power level of the cooking zone and then press the “Timer” key. The timer can now be set
2. When the timing indicator has been flashing for 5 seconds, the set time will be automatically confirmed
3. After selecting a set time, confirm by pressing the “Timer” key
To cancel the timer, hold down the “Timer” key for 5 seconds.This will cancel the timer and the indicator will revert to “0”.
Safety mode
To ensure the safety of children, the induction hob is fitted with an interlock device. To lock: hold down the “Interlock”; the hob then goes into “Interlock” mode, the timer shows “Lo” and the rest of the keys are disabled except the “ON/OFF” key. Hold down the “Interlock” key for 2 seconds and the hob will return to normal working.

Power Auto-limitation
The whole hob can take in charge a maximum power of 3000W. Consequently, the hob automatically reduces the maximum output power by allowing a maximum sum of the all power levels of 12.

Heating zone	Max. Power (W)
1	1500
2	2000
3	2000
3	1500

Failure Display and Inspection
If any abnormality occurs, the induction hob will automatically go into protective mode and display one of the following codes:

Fault	Possible cause	Solutions
F0/F1/F2	Fan failure	Contact the supplier
F3-F8	Temperature sensor failure	Contact the supplier
E1/E2	Abnormal voltage in power supply	Check if power supply is normal. Power on after power supply returns to normal.
E3/E4	Abnormal temperature	Check the pan
E5/E6	Poor heat radiation in cooking zone	Restart when cooking zone cools down